Technical Data - Olympia TV 150 Manual De Instrucciones

TV Simulator TV 150
Intended Use
The TV simulator feigns your presence at home and deters potential intruders.
A condition for complying with the intended use is that the equipment is installed
correctly and the information in the manual is observed and maintained.
Any use other than that described in Section "Intended Use" is considered
unintended use. Unauthorised modifi cations or reconstructions are not permitted
and could cause damage to the TV simulator.
Safety Instructions
Avoid any personal injury by paying attention to the following information!
W
ARNING ! Risks through use of unsuitable power adapters!
There is a risk of receiving an electric shock if you use unsuit-
able power adapters! Only use the power adapter supplied.
W
ARNING ! Risk of suffocation! Children can swallow small
parts, packaging and protective foils. Keep the product and
packaging out of reach of children!
W
ARNING ! Risk of injury to the eyes! The light produced by the
light screen at the front of the TV simulator is very bright. Do
not look directly into the light on the front of the TV simulator
when the TV simulator is switched on.
Package Contents
Check the package contents of your TV simulator before starting to put the TV
simulator into operation. If anything is missing or damaged, please contact our
Service department.
■
TV simulator
■
Power adapter
■
Operating manual
General View
The illustrations at the top show the TV simulator in detail.
1 Light screen (coloured)
2 Base
3 Operating mode button
4 Twilight sensor
5 Display
6 Connection port for power adapter
Connecting the Power Adapter
The TV simulator is supplied with electricity via the power
adapter supplied.
Connect the power adapter to the connection port on the rear
side of the TV simulator and to a properly installed power
1
2
socket.
Positioning the TV Simulator
You can position the TV simulator in a location of your choice. We recommend that
you position the front side facing a window to produce the best simulation effect.
Please note that external light sources, such as car headlights on a busy street or
bright street lights, can infl uence the function of the brightness sensor.
Switching the TV Simulator On
Switch the TV simulator on to produce a deceptively realistic fl ickering of light simi-
lar to a television set. On taking a look at the window, a potential intruder would be
deceived by the simulation of a television.
Continual Operation
Press the button on the rear until 1 appears in the display.
The TV simulator is switched on continually.
The TV simulator does not switch off automatically when
set to this operating mode. In order to prevent unnecessary
power consumption, use the Timer function or switch the TV
simulator off when you do not want to use it.
Operation with Timer
The integrated twilight sensor detects when it is starting to get dark and switch-
es the TV simulator on automatically. You can defi ne how long the TV simulator
should remain switched on. You can set the timer to operate your TV simulator
automatically from 2 to 9 hours.
The number in the display corresponds to the period of automatic operation (the
illustration shows 6 hours as an example).
Press the button on the rear until the display shows the
required period for automatic operation. The TV simulator
switches on automatically as soon as it starts to get dark (light
intensity <30 lux).
Switching the TV Simulator Off
Press the button on the rear until 0 appears in the display. The TV simulator is
switched off.
In order to prevent unnecessary power consumption and when you do not want to
use the TV simulator, disconnect the power adapter of the TV simulators from the
power socket.
3
Disposal
In order to dispose of your device, take it to a collection point provided by
your local public waste authorities (e.g. recycling centre). According to
laws on the disposal of electronic and electrical devices, owners are
obliged to dispose of old electronic and electrical devices in a separate
waste container.
Packaging materials must be disposed of according to local regulations.
Care Instructions
Clean the surface of the housing regularly with a soft, lint-free cloth. Do not use
any solvents or cleaning agents.
Guarantee
Dear Customer,
we are pleased that you have chosen this equipment.
In the case of a defect, please return the device together with the receipt and origi-
nal packing material to the point-of-sale.

Technical Data

Weight Approx. 230 g
Dimensions (W x H x D) 80 x 120 x 40 mm
Power supply Input: 230 V, 50 Hz, 9 VDC, 300 mA
Output: 9 V, 300 mA
Power consumption Approx. 2.7 W
Permissible -10 °C to +40 °C at
ambient conditions 30% to 75% rel. humidity
Operating modes Continually on,
Timer (on for 2 to 9 hours)
Light screen (LED) 12 LEDs, multicoloured
4
5
6
Version 06.2019
Art. 5966