Sleep Operation - Aerian AAC9K Manual Del Usuario

2. Repeatedly press
to change the
time.
Press and hold
On the control panel display, the time will be changed in half an hour increments up to 10 hours,
and then in 1 hour increments up to 24 hours.
On the remote display, the time will be changed in half an hour increments up to 24 hours.
3. Once set press
The indicator light
setting will countdown.
4. When the set time has been reached, the appliance will be turned off automatically.
To cancel the timer setting
Press on the control panel or
Press the button again to cancel the timer function. The indicator light
out and the arrow pointing to
Sleep operation
The sleep function adjusts the set temperature of the appliance to the thermal needs of the body falling
asleep.
NOTE: This function is available in cool mode ONLY.
Press on the control panel or
The sleep indicator light
display.
• The set temperature will increase by 1°C after one hour and increase a further 1°C after two hours.
/ on the control panel or
/ on the remote control for fast setting.
on the control panel or
and/or the arrow pointing to
/ will disappear from the remote display.
will illuminate or the arrow pointing to
/
on the remote control to confirm.
will stop flashing. The time
on the remote control to check the remaining time.
on the remote control to operate the sleep mode.
EN-14
on the remote control
on the control panel will go
will appear on the remote