Kruger DT 154 Manual De Uso página 23

MODALITÀ DI FUNZIONAMENTO MODELLI AD INCASSO (DTI 300)
5
AUTOMATIC MODALITY
The unit purifies the air in a completely automatic way.
MANUAL MODALITY
The operator has the possibility to choose the wanted operating speed,
by selecting it with the remote control
5.1
AUTOMATIC MODALITY
BY REMOTE CONTROL – switch on the unit by pushing pressing the ON
/ OFF button; press the FAN + button until the yellow led on the display
switches on (it can be found next to the ON/OFF button).
BY PANEL – the same function is obtained by repeatedly pressing the
button .
Through these modalities the air cleaner operates automatically, chan-
ging the air inlet speed from the first to the third speed and vice-versa,
according to the degree of pollution found by the sensor.
5.2
MANUAL MODALITY
BY REMOTE CONTROL
- switch on the unit by pushing the ON/OFF button
- push the FAN + or FAN – button in order to select one of the 5
operating speeds
BY PANEL – the same function is obtained by repeatedly pressing the
button .
N.B: IN ORDER TO GUARANTEE BETTER PURIFICATION, IT IS ADVI-
SABLE TO OPERATE IN THIRD SPEED.
AUTO RESTART
This air cleaner is provided with a memory device, which starts working
in case of lack of electrical power. The PC board will re-start automati-
cally with the same mode setting.
5.3
AIR RECIRCULATION FUNCTION (optional)
The air cleaner can be equipped with air recirculation function, which can be
started at any moment after the machine switching on.
To activate it, just keep the ON/OFF key on the remote control pressed for
about 4 seconds, when it is released, the lighting up of an orange led will indi-
cate the correct working of the fan.
To deactivate it, press again for 4 seconds the ON/OFF key on the remote
control.
24
®
Automatic function
Air cleaner in standby
-red led switched on-
operating in first speed 1
green led switched on
operating in fifth speed 5
green leds switched on
air recirculation
ENGLISH