Sperian Miller 90009006 Manual Del Usuario página 4

The efficacy of the mark to this article means that it has satisfied the essential requirements provided for in directive
89/686/EEC, relative to Personal Protection equipment. In terms of ergonomics, the vest must offer the best possible
level of comfort compatible with suitable protection Fluorescent yellow or orange cover high visibility vest.
This garment is to be used solely as a signaling vest to be worn during works on roads, motorways, in towns or on
sites. It does not provide any other protection from any other risk (for instance, thermal or chemical risks). It must
be closed and worn over any other garment. A dirty garment can result in reduced protection. This PPE does not
contain harmful (or likely) substance to cause an allergy for the end user .
EN 471 (1994)
The first number outside the pictogram indicates the fluorescent and retro-reflecting material surface class i.e. 3/3
(see table below).
The second number indicates the retro-reflecting material class, i.e. 2.
Basic material
Retro-reflecting material
Materials with combined characteristics
EN 340 (1993)
Store the garment in its original package in a dry and airy place away from light and heat.
REMINDER CONCERNING MAINTENANCE PICTOGRAMS:
c
Wash at up to 60°
r
Bleaching prohibited.
m
Do not iron.
ut
Dry-cleaning because of fluoride and clear and perchlorethylene..
n
Drying permitted.
i
Washing number X 50
Storage instructions:
We advise you to store this garment in its original pack, in a clean and dry place, ventilated and away from damp
and light.
Expiration: Recommended for use within the 5 years following the year of manufacture.
Packing: Individual plastic bag preserving the performance of the product and allowing its label to be read.
4
USER INSTRUCTIONS
EN 471 (1994)
X indicates the PPE class (from 1 to 3 - see label)
See table opposite.
Y indicates the retro-reflection material class (from 1 to 2 see label)
Minimum visible surface areas of each material in square metres
Garment in Class 3
EN 340 (1993)
P indicates waist measurement (in cm)
H indicates wearer height (in cm)
Garment in Class 2
0.8
0.2
-
Garment in Class 1
0.50
0.13
-
0.14
0.10
0.20