ASROCK 775Dual-VSTA Manual Del Usuario página 7

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION!
1.
About the setting of "Hyper Threading Technology", please check page 32
of "User Manual" in the support CD.
2.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 24 for details.
3.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 13 for proper installation.
4.
Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
5.
While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
6.
For the information of the compatible PCI Express VGA cards, please
refer to the "Supported PCI Express VGA Card List for PCI Express
Graphics Slot" on page 9. For the proper installation of PCI Express VGA
card, please refer to the installation guide on page 15.
7.
Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
8.
For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 3 for
proper connection.
9.
Power Management for USB 2.0 works fine under Microsoft
TM
Vista
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
®
®
10. Microsoft
Windows
Vista
website in the future. Please visit our website for Microsoft
driver and related information.
ASRock website
http://www.asrock.com
ASRock 775Dual-VSTA Motherboard
TM
driver is not ready yet. We will update it to our
®
®
Windows
®
Windows
®
Vista
TM
7 7 7 7 7
Tabla de contenido
loading

Tabla de contenido