Ending Calls - Konig Computer CMP-HEADSET30 Manual De Uso

5. Stereo Headset paired with Bluetooth mobile phone Guide
5.1. Pairing
a. While the Headset is powered off, press and hold
The LED will flash red and green alternatively, which indicates the Headset in
Pairing Mode. The Pairing Mode will last for one minute.
b. Follow the operating instructions of your Bluetooth mobile phone to start the
pairing process. Typically, this has to be done by going to a setup or connect
menu and then selecting the options to discover Bluetooth devices. It may take
several seconds to establish a Bluetooth connection. Your phone's display should
indicate that it has found the model name "CMP-HEADSET30"; and prompt you
for a passkey or PIN. Enter a sequence of "0000".
c. If the pairing is successful, the LED will flash green, which indicates it is in
Standby Mode and ready to answer and receive mobile phone calls from it. If
pairing does not occur as expected, turn the Headset and the mobile phone off.
Wait for 10 seconds and repeat the pairing process from the beginning.
5.2. Answering incoming calls/Rejecting incoming calls
a. When an incoming call is present, a ring tone will be heard from the earpiece
of the Headset. Press PLAY button will answer the call. Press
reject the call.
b. (Advance function) If the Headset is connected to your mobile phone and another
Bluetooth transmitter such as the Audio Adaptor simultaneously and you are
listening to the music using the earpiece, a ring tone will prompt you. Press PLAY
button will answer the call. Press
continue listening to the music.

5.3. Ending calls

a. While a call is in session, press
b. (Advance function) If the Headset is connected with your mobile phone and
another Bluetooth transmitter such as the Audio Adaptor simultaneously, press
STOP button will end the call and you will continue listening to the music.
button will reject the call and you will
button will end the call.
5
button for 5 seconds.
button will