Premier SCR-1510 Manual De Instrucciones página 11

Fig. 2
23
25 26
1. OPEN BUTTON
Press the OPEN button to fold down the front control panel.
Then a CD can be inserted into the CD slot or ejected by pressing the EJ button.
After flipping down the front panel, push it leftwards firstly, then draw the right of
the panel outwards.
2.3. SEL BUTTON (Select) AND VOL KNOB
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER ->
In each mode, the waiting time is about 5 seconds, and the time waiting time is over, it returns to
the last display mode of tuner or CDP mode.
VOLUME CONTROL
1) The volume can be adjusted at any time by rotating the VOL knob as select mode has been
initially defaulted at volume mode.
2)The volume can be also obtained by continuously pressing the SEL button until the character
VOL appear on the LCD display, then rotate the VOL knob to adjust the volume.
BASS CONTROL
1) Press SEL button to select the bass mode until BAS appears on the display.
2) Rotate the VOL knob to adjust the bass.
TREBLE CONTROL
1) Press SEL button to select the treble mode until TRE appears on the display.
2) Rotate the VOL knob to adjust the treble.
BALANCE CONTROL
1) Press SEL button to select the balance mode until BAL appears on the display.
2) Rotate the VOL knob to adjust the left/right speaker balance.
FADER CONTROL
1) Press SEL button to select the balance mode until FAD appears on the display.
2) Rotate the VOL knob to adjust the front/rear speaker balance.
b) When pressed longer 2 seconds, it is activated as cyclical mode of following functions for
user's selection.
-> BEEP (2nd/ALL/OFF) ->SEEK1/ 2 -> DSP(OFF/POP/ROCK/CLASSIC/FLAT)
->VOL LAST/VOL ADJ ->ESP 40/10 mode.
After selecting the desired mode, rotate the VOL knob to select one setup item of the
desired mode.
BEEP 2ND, BEEP ALL, BEEP OFF MODE
The situation of beep sound is selected. The 3 mode is selected as also rotating the VOL knob.
Page 2
24
- Beep 2nd mode:
The beep is only generated when an allotted double key is pressed long (1second).
- Beep all mode:
The beep is generated when every key is pressed.
- Beep off mode:
The beep sound is disabled when a key is pressed.
SEEK 1/SEEK 2 mode:( Only available during radio operation)
SEEK 1: Press and hold the >>| or |<< button to seek up or down for the strong signal stations.
And the seek stops when received a strong signal station.
SEEK 2: Press and hold the >>| or |<< button to seek up or down for the strong signal stations.
But the seek does not stop when received a strong signal stations excepting release
the >>| or |<< button.
VOL LAST/VOL ADJ
VOL LAST: The radio switches on at the actual volume it had when it was last switched off.
VOL ADJ: Rotating the VOL knob you can pre-select a constant switch-on volume.
ESP 40 seconds/10 seconds:
In ESP mode, you can select 40 seconds or 10 seconds electronic shock
protection mode by rotating the VOL knob.
The default setting is at 40 seconds of anti-shock protection.
Using 10 seconds ESP will slightly improve the audio performance, while 40
seconds ESP will be effective when the vehicle is driven on a rough road.
4. POWER ON/OFF
When the unit is power off, the unit comes to ON by pressing any button on the front panel
(except the OPEN key or the EJ key). It also can turn on the unit to insert a disc into CD slot.
When the unit is power on, press and hold the power button for more than 0.5 seconds, the
unit goes into power off mode.
5. LCD Display
6.7. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS
a) During RADIO mode:
Press the >>| or |<< button shortly to manual tune up/down for the desired radio station
frequency with step by step.
Press and hold the >>| or |<< button for longer 0.5 seconds, to automatically tune up/down
for the radio station frequency of strong signal.
b) During CD/MP3 playback mode:
Press the >>| button briefly to play next track. Press the |<< button once to play the current
track from the beginning of the current track.
Press the |<< button twice continuously to play the previous track.
When the >>| or |<< button is pressed long (more than 1 seconds) for skip forwards or backwards.
8. BAND BUTTON
Press the BND button briefly to select the radio broadcasting band you would like to hear.
The AM/FM band is toggled cyclically through the tuning bands
->FM 1-> FM 2 -> FM 3 -> AM 1->AM 2 ->.
In MP3 disc mode, if you press BND button repeatedly, the file name, folder name, song's title, artist
and album information will be scrolling on the LCD display. As long as the current playing MP3 music
contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined above will be
scrolling on the LCD display; otherwise, they will not.
In CD & MP3 mixed-formatted disc playback mode, pressing the BND button for more than 2 seconds
will change from playing the CD formatted songs to MP3 formatted songs and vice versa.
In a default mode, the unit will first play all the CD formatted songs and than play the MP3 formatted
songs.
Page 3