Idiomas disponibles
Idiomas disponibles
Symptom
Possible Problem
There is a
If using an alternate audio source, the audio
crackling
source is not properly connected to the
sound coming
inMotion iMT1 or there is a problem with the
from speakers.
alternate audio source.
There is a
The volume level in operating system is set
crackling
too high.
sound coming
from speakers
(when
connected to
PC or laptop).
The sound is
The volume level on inMotion iMT1 is set too
distorted.
high.
The sound
The inMotion iMT1 is in phone mode.
quality is poor.
There is radio
The unit is too close to a radio tower.
interference.
Solution
Connect an alternate audio source — such as a CD player, MP3 player,
or portable DVD player — to your inMotion iMT1 by plugging one
end of the 3.5mm stereo cable to the line out of your portable
device (if it has one) or to the device's headphone jack. Connect
the other end to the input marked "AUX" on the back of the
inMotion iMT1.
Check the operating system volume level and decrease if necessary.
The "+" and "-" buttons on the top of the inMotion iMT1 are the
master volume controls. Press and hold the "-" button to decrease
the volume.
Ensure that the inMotion iMT1 is in music mode by pushing the
mode button
until the blue LED with the music note turns on.
Move your speakers to see if the interference goes away.
4
