Operator Use - Omron VARISPEED V7 IP65 Guia De Inicio Rapido

Ocultar thumbs Ver también para VARISPEED V7 IP65:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54

4. Operator Use

Appearance
R U N
STOP
RESET
EN-8
Name
Function
Displays relevant data, items, such as frequency reference, output
Data display
frequency and parameter set values.
FREF Indicator
The frequency reference can be monitored or set while this
indicator is lit.
FOUT Indicator
The output frequency of the inverter can be monitored while this
indicator is lit.
IOUT indicator
The output current of the inverter can be monitored while this
indicator is lit.
MNTR indicator
The values set in U-01 through U-19 are monitored while this
indicator is lit.
F/R indicator
The direction of rotation can be selected while this indicator is lit
when operating the inverter with the run key.
LO/RE indicator
The operating of the inverter through the Digital Operator or
according to the set parameters is selected while this indicator is lit.
Note: The status of this indicator can be only monitored while the
inverter is in operation. Any RUN command input is ignored while
this indicator is lit.
PRGM indicator
The parameter in n01 through to n179 can be set or monitored
while this indicator is lit.
Note: while the inverter is in operation, the parameters can be only
monitored and only some parameters can be changed. Any RUN
command input is ignored while this indicator is lit.
Mode Key
Switches the setting and monitor item indicator in sequence.
Parameter being set will be cancelled if this key is pressed before
entering the setting.
Increment Key
Increases multi-function monitor numbers, parameter numbers and
parameters set values.
Decrement Key
Decreases multi-function monitor numbers, parameter numbers
and parameters set values.
Enter Key
Enters multi-function monitor numbers, parameter numbers and
internal data values after they are set or changed.
RUN Key
Starts the inverter running when it is in operation with the Digital
Operator.
STOP/RESET
Stops the inverter unless parameter n07 is not set to disable the
Key
STOP Key.
Data display
Monitor item
indicators
Operation keys
DIGITAL
OPERATOR
JVOP-147
Tabla de contenido
loading

Tabla de contenido