ASROCK 4Core1600Twins-P35D Manual De Usuario página 28

2.10 eSA 2.10 eSAT T T T T AII Inter 2.10 eSA AII Inter AII Inter AII Inter face Introduction
2.10 eSA 2.10 eSA AII Inter
What is eSATAII?
This motherboard supports eSATAII interface, the external SATAII specification.
eSATAII allows you to enjoy the SATAII function provided by the I/O of your computer,
offering the high speed data transfer rate up to 3.0Gb/s, and the convenient mobility
like USB. eSATAII is equipped with Hot Plug capability that enables you to exchange
drives easily. For example, with eSATAII interface, you may simply plug your eSATAII
hard disk to the eSATAII ports instead of opening your chassis to exchange your
SATAII hard disk. Currently, on the market, the data transfer rate of USB 2.0 is up to
480Mb/s, and for IEEE 1394 is up to 400Mb/s. However, eSATAII provides the data
transfer rate up to 3000Mb/s, which is much higher than USB 2.0 and IEEE 1394, and
still keeps the convenience of Hot Plug feature. Therefore, on the basis of the
advantageous transfer speed and the facilitating mobile capability, in the near future,
eSATAII will replace USB 2.0 and IEEE 1394 to be a trend for external interface.
NOTE: 1. If you set "Configure SATAII as" option in BIOS setup to AHCI mode, Hot
Plug function is supported with eSATAII devices. Therefore, you can insert or
remove your eSATAII devices to the eSATAII ports while the system is power-on and
in working condition.
2. If you set "Configure SATAII as" option in BIOS setup to IDE mode, Hot Plug function is not supported with eSATAII devices. If you still want to use eSATAII function in IDE
mode, please insert or remove your eSATAII devices to the eSATAII ports only when
the system is power-off.
3. Please refer to page 33 to 35 for detailed information of IDE mode and AHCI mode.
How to install eSATAII?
SATAII connector SATAII_6 (Port5)
2 8 2 8 2 8
2 8 2 8
ASRock 4Core1600Twins-P35D Motherboard
face Introduction face Introduction face Introduction
face Introduction
eSATAII connector
(eSATAII)