Deltaco Gaming DC220 Manual Del Usario página 6

ENG
Connect
1. Connect the USB cable to a 5V power
supply.
1.1 Optional: Power bank (not included)
as a power supply for freedom from
cables.
1.2 Optional: Use a USB power adapter
(not included) as stable power supply.
You can use other USB power supplies as
well, such as a computer or laptop.
Features
19 LED modes, 20 static LED modes,
demo mode, automatic save function, 5
brightness levels, 10 speed levels,
voltage input 5V DC, remote included, the
remote controll's frequency is 433.92MHz,
the remote control's range is up to 20m
(open area).
Remote
6
1.
= On/off button (Restores to last used
LED mode)
2.
= "Demo", activates demo LED mode
3.
= "Speed +", increases LED speed
SPEED
+
(Switches to LED mode)
4.
= "Speed -", decreases LED speed
SPEED
-
(Switches to LED mode)
5.
= "Bright +" increase LED intensity
BRIGHT
+
(Switches to static LED mode)
6.
= "Bright -" decrease LED intensity
BRIGHT
-
(Switches to static LED mode)
7.
= "Mode +", next LED mode
MODE
+
8.
= "Mode -", previous LED mode
MODE
-
9.
= "Color +", next static LED mode
COLOR
+
10.
= "Color -", previous static LED mode
COLOR
-
LED modes
To cycle through 19 LED modes press
"Mode+" or "Mode-".
To cycle through 20 static LED modes
press "Color+" or "Color-".
Pressing "Demo", activates a loop that
cycles 9 LED modes.
Power usage
The power usage is strongly affected by
the brightness level of the LED.
For example: The power usage is reduced
to half as much when decreasing the
brightness level with 1 step from the
highest setting.
Remote control battery
Before first use, please remove the
plastic insulation. Battery type is 3V
CR2025.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: [email protected].