Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENG I Installation
Connecting the Digital Flat 2.5 directly to your TV
Connecting the Digital Flat 2.5 to a set-top box
Possible sources of error
My TV is located in a metal shelf. Will the antenna work
here?
Large metal objects can interfere significantly with the recep-
tion quality of the antenna. Try positioning the antenna outside or
above the metal shelf. If you want to use the antenna inside the
shelf, you should opt for an upright installation.
My walls have aluminium insulation. Where should I
position the antenna?
If you happen to have poor signal quality, position the antenna
near a window in order to avoid harmful interference and im-
prove signal strength.
1. Make sure that the TV is switched off.
2. Connect the coaxial cable of the Digital Flat 2.5 to the
antenna connection on your TV.
3. Plug the mains adapter for the amplifier into a power outlet.
4. You can now switch on your TV and search for stations.
1. Make sure that the set-top box is switched off.
2. Connect the coaxial cable of the Digital Flat 2.5 to the
antenna connection on your set-top box.
3. Plug the mains adapter for the amplifier into a power outlet.
4. Follow the instructions in the user manual supplied
with your set-top box.
5. You can now use your set-top box and search for stations.
Can I use my antenna in a basement?
TV signals cannot normally be received in a basement. Please
note: Other influences that are not related to antenna perfor-
mance can also interfere with reception. These can be, for
example, large distances to the nearest transmitter or objects
which impede the signal.
Tabla de contenido
