Allen-Bradley 931S-C3C3J-DC Manual Del Usuario página 5

Connections
For effective protection from electromagnetic noise, all signal
cables must be shielded, or located on conductive trays or in
conduits.
Strip wires to 7 mm from the ends. Use a suitable ferrule for multi-
stranded wires (do not solder).
Terminal Signal
1 Supply +
7 Supply −
4 Voltage Input +
3 Voltage Input −
2 Current Input +
3 Current Input −
3 Device +
2 Device −
6 Voltage Output +
5 Voltage Output −
8 Current Output +
5 Current Output −
Power Supply
Voltage Input
Current Input
Loop Powered Trans-
mitter Input
Voltage Outputs
Current Outputs
Input Type Jumper to 'Volts'
Field Supply Jumper to 'Off'
Input Type Jumper to 'Current'
Field Supply Jumper to 'Off'
Input Type Jumper to 'Current'
Field Supply Jumper to 'On'
Output Type jumper to 'Volts'
Output Type jumper to 'Current'