Manual Pairing Of Cameras - Thompson 512322 Manual Del Usuario

d - CONFigurATiON
5 Sender address. In our gmail example:
[email protected] Click "shift" on
the on-screen keyboard for "@".
6 Minimum time period between 2 consecutive
alerts, set to your preferences. You will
not receive multiple emails within a certain
time period.
7 Password that corresponds to the email
sender address. In our gmail example, this
is the password requested when logging into
the inbox at www.gmail.com
8 Email address that receives the alerts sent
by your device. In our example : recipient@
gmail.com. Once the addresses are entered,
a "Email essai" (Test email) button appears: if
you want, click it to send a test email.
9 Emails are sent 24 hours a day, 7 days a
week by default. This button lets you set the
time at which email sending is authorised.
Here you can set the time slots during which
no emails are to be sent.
You can set the time slots independently
for motion detection (in green), wired input
activations (in yellow) and other events
(in red: camera connection is lost,
camera is covered, etc.)
11 Click "Sauver" (Save) after making
modifications to save your settings
Important notes:
• In the "Paramètre" (Settings)/"Entrée filaire"
(Wired input)/ "Mouvement" (Movement) menu,
don't forget to tick the Email box so that your
recorder can alert you by email when movement
is detected (see previous paragraph).
• Some email providers will ask for confirmation
before allowing your device to use their service
(as with www.gmail.com in our example). See the
sender address inbox for more details.
18
en
Plug and Play 8 channel colour
network video recorder

2.9 - MANUAL PAIRING OF CAMERAS

The Thomson cameras that are used with your
device should be recognised automatically. However,
your digital video recorder is also compatible with IP
cameras or networks that meet the ONVIF standard
(example: Thomson IP cameras, references 512390
to 512393), limited to 8 device channels.
To pair a camera manually, go to "Paramètre"
(Settings)/"Réseau"
"Mode manuel" (Manual mode) then click "Sauver"
(Save):
Then go to "Paramètre" (Settings)/"Ecran"
(Screen)/"caméra IP" (IP camera). Click the "Ajout
manuel" (Add manually) button:
1 2 3 4
11 12
(Network)/"Switch".
5 6 7 8 9 10
13
Select