Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5
DISPLAY (T/F) BUTTON
IGNITION-OFF CLOCK CALL
During radio operation, a momentary press of the button will
change the display from frequency to clock time. Press again
and the radio display will change back to frequency.
During CD operation, a momentary press of the button will change
the display from track elapsed time to clock time.
IGNITION-OFF CLOCK CALL: To check the time with the vehicle
ignition switch in the "off" position, momentarily press the T/F
button. The display will illuminate and show the time and then
automatically shut off after 5 seconds.
6
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
4
the Select button
so that the level number above the BASS
indication is flashing. Within 5 seconds of choosing the Bass
mode, press either the
/
3
control
to adjust the bass response as desired. The bass
level will be shown on the display panel from a minimum of –7 to
a maximum of 7 (0 is flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
7
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
4
the Select button
so that the level number above the TRE
indication is flashing. Within 5 seconds of choosing the Treble
mode, press either the
/
3
control
to adjust the treble response as desired. The treble
level will be shown on the display panel from a minimum of –7 to
or the
/
buttons of the Level
or the
/
buttons of the Level
a maximum of 7 (0 is flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
8
LEFT/RIGHT BALANCE & FRONT/REAR FADER CONTROL
To adjust the left-right speaker balance and front-rear fader, first
select the Balance/Fader mode by pressing the Select button
R
F
so that the
0
0 indication appears on the display panel. Within
L
R
5 seconds of choosing the Balance/Fader mode, press the
button of the Level Control
the left channel speakers or the
channel speakers. When the volume level between the right and
left channels is equal,
R
0 will be shown on the display panel.
L
Adjusting the balance toward the right will increase the number on
the right side of the display to a maximum of
ing the balance toward the left will increase the number on the
left side of the display to a maximum of
will automatically return to the normal indication 5 seconds after the
last balance adjustment or when another function is activated.
Press the
or the
buttons of the Level Control
front-rear speaker levels as desired. When the level of the front
and rear speakers is equal,
Adjusting the fader toward the front speakers will increase the
number on the left side of the display to a maximum of
front). Adjusting the fader toward the rear speakers will increase
the number on the right side of the display to a maximum of
rear). The display will automatically return to the normal indi-
cation 5 seconds after the last fader adjustment or when another
function is activated.
-2-
3
to adjust the stereo balance to
button to adjust it to the right
R
9 (full right). Adjust-
9 (full left). The display
L
3
to adjust the
F
0 will be shown on the display panel.
R
4
F
9 (full
9 (full
R
Tabla de contenido
