Arcan AR2TEC Manual De Instrucciones

IMPORTANT: if you have any problems or concerns with our product, please call 864-660-0037
for immediate assistance. Please do not call the store where you purchased this product.
AR2TEC
SPECIFICATIONS:
Boom Capacity ........................ Pos. 1 @ 1/2 Ton .......................... Pos. 2 @ 1 Ton .........................Pos. 3 @ 1-1/2 Ton .................. Pos. 4 @ 2 Ton
Max. Boom Ht. ................................ 96.5" ...........................................90.5" ........................................... 84.5" ....................................78.5"
Min. Boom Ht. .....................................0" ................................................ 0" .............................................. 5.5" ....................................11.75"
Boom Ext. From End
to Ram .........................................48" .............................................41.5" .............................................34" ....................................... 27"
Base Dimensions – Open
Width Back .......................................................................................................................................................................................................34"
Width Front ....................................................................................................................................................................................................35.5"
Length ...........................................................................................................................................................................................................69.5"
Base Dimensions – Folded
Width Back .......................................................................................................................................................................................................34"
Width Front .......................................................................................................................................................................................................24"
Depth .............................................................................................................................................................................................................21.5"
Power Unit ...................................................................................................................................................................8 Ton Heavy Duty Quick Lift
Shipping Weight ........................................................................................................................................................................................ 210 Lbs.
(Shipped in 2 boxes)
AR2TEC © 2010 Arcan Tools
2 TON CAPACITY
FOLDABLE ENGINE CRANE
WARNING
• READ, STUDY, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS
BEFORE OPERATING THIS DEVICE. • INSPECT CRANE BEFORE EACH
USE. DO NOT USE IF DAMAGED, ALTERED, MODIFIED, IN POOR
CONDITION, LEAKING HYDRAULIC FLUID, OR UNSTABLE DUE TO LOOSE
OR MISSING HARDWARE OR PARTS. MAKE CORRECTIONS BEFORE
USING. • NEVER GET UNDER A LOAD BEING LIFTED OR SUSPENDED. •
WEAR EYE PROTECTION THAT MEETS ANSI Z87.1 AND OSHA STANDARDS.
• USE ONLY ON A HARD LEVEL SURFACE. • DO NOT RAISE THE BOOM IF
THE CRANE IS EQUIPPED WITH A FOLDABLE OR STORABLE LEG FEATURE
AND THE LEGS ARE IN THE UPRIGHT POSITION. LEGS MUST BE SECURED IN
THE UPRIGHT POSITION WHEN NOT USED. • USE ONLY SLINGS OR CHAINS
WITH A RATED CAPACITY GREATER THAN THE WEIGHT OF THE LOAD BEING
LIFTED. • DO NOT EXCEED RATED CAPACITY. • DO NOT LIFT OR MOVE A
LOAD THAT HAS A CENTER OF GRAVITY EXTENDING BEYOND THE FRONT
WHEELS. • DO NOT ALLOW LOAD TO SWING OR DROP VIOLENTLY WHILE
RAISING, LOWERING OR MOVING. • BEFORE MOVING, LOWER LOAD TO THE
LOWEST POSSIBLE POINT. • NO ALTERATIONS SHALL BE MADE TO THIS
PRODUCT, AND DO NOT USE ANY UNAPPROVED ATTACHMENTS. • FAILURE
TO HEED THESE MARKINGS MAY RESULT IN SERIOUS OR FATAL PERSONAL
INJURY AND/OR PROPERTY DAMAGE.
1 rev. 042310