Chauvet Well Quad-M Guía De Referencia Rápida página 3

EN
AC Power
AC Plug
Replacing the
Fuse
Battery Charge
Notes
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
The standalone battery charger has no external fuse. However, the flight
case/charger comes with a replaceable fuse.
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
·
Make sure to turn the battery storage switch on before connecting the
product to the charger.
·
Always use the supplied charger to recharge the built-in battery.
·
Recharge the battery within three days of last use.
·
Recharge the battery to full capacity before storing this product.
·
For best results, charge the battery in a temperature between
32º F (0º C) and 95º F (35º C).
·
When charging the battery, keep the product at no less than 1 m from
any open flame or hot plate.
·
When charging the battery inside the flight case/charger, keep the
flight case's cover open.
·
Always charge the battery with the product in an upright position.
·
Do not keep charging the battery for more than 24 hours.
·
Perform a full discharge/recharge cycle every three months.
·
During charging, the green power indicator LED will illuminate solid,
regardless of the level of charge of the battery.
·
Once fully charged, while still connected to the battery charger, the
green power indicator LED will turn off.
· Always store the product in an upright position (≤ 10º tilt).
·
Store charged product(s) in a dry environment, away from direct
sunlight.
·
Turn the battery switch off if storing the product for more than 7 days.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
WELL™ Quad-M QRG
Screw Color
Brown Yellow/Brass
Blue
Green
Silver