Marmitek HDTV Anywhere Modo De Empleo página 5

4.2 Connecting the HDTV transmitter
The HDTV transmitter uses the power network to send the HD signal
wirelessly to the HDTV receiver in another room. This requires you to place
the HDTV transmitter close to your HD devices (e.g. a digital TV decoder,
Blu-ray player, Media Center PC or hard disk recorder).
Blu-Ray Player
Digital TV Decoder
1. Connect up to 2 HD devices to the HDTV transmitter [1] using an HDMI
cable at HDMI IN.
2. Optionally: Connect an HDTV to the HDTV transmitter [2] at HDMI OUT
to continue to watch TV in this room as well.
3. Connect the supplied power cable to the HDTV transmitter [3] and plug
it into the socket.
4.3 Connecting the HDTV receiver
Place the HDTV receiver in the room (bedroom, study or other room) where
you want to connect the second HDTV or HD projector.
RESET
IR IN
HDTV
1. Connect your HDTV or HD projector to the HDTV receiver [1] using an
HDMI cable at HDMI OUT.
2. Connect the supplied power cable to the HDTV receiver [2] and plug it
into the socket.
HDTV Anywhere™
HDMI IN 1 HDMI IN 2 HDMI OUT
RESET
IR OUT
HDMI OUT SERVICE
OR
SERVICE
HDTV
100 ~ 240 VAC
HD Projector
100 ~ 240 VAC
5