Turning your multi-CD
system on and off
Press Power once to turn your multi-CD
®
Wave
music system on or off. The system
turns on to the last source played. If the last
source was CD, the last disc selected starts to play.
Press Power again to turn the system off.
Press CD to turn the system on to the CD
source. The last disc selected will play.
Loading and unloading
discs
You can load and unload discs with the system on or off.
If the system is off or in the CD source mode, the first
disc loaded starts playing automatically. Disc slots are
numbered 1 through 4. The Wave
disc slot 1. The changer has disc slots 2, 3 and 4.
Loading CDs into the Wave
system (Disc 1)
Insert the disc, label side up, into the CD slot below the
display. The disc player will automatically pull the disc in.
®
music system has
®
music
Loading CDs into the Multi-CD
Changer (Disc 2 - Disc 4)
Insert a disc, label side up, into an empty slot. An empty
slot is indicated by an unlit disc slot indicator. With your
fingers on the outside edge of the disc, push the disc all
the way into the slot.
Disc slot indicators
Off .......................... Empty disc slot.
Solid green ............. The current disc slot.
Solid amber............ The disc slot contains a
Unloading discs
You can unload discs while the system is off
or in the CD source mode. Press Stop/Eject
on the remote control to eject the current
disc. After removing the disc from its slot, the
system moves to the next available disc which then can
be ejected by pressing Stop/Eject again.
For more information on using the Stop/Eject key,
see "Ejecting a CD" on page 10.
CAUTION:
• DO NOT INSERT mini CDs or non-circular CDs into
any disc slot. These discs may not play properly and
could interfere with the system's ability to eject them.
• DO NOT INSERT more than one disc at a time into any
disc slot.
• Doing either of the above can cause damage to the
disc and/or the disc slot.
O
PERATION
CD, but it is not currently
selected.
English – 9