HM Digital TDS-3 Manual De Instrucciones

WHAT IS TDS?
Total Dissolved Solids (TDS) are the total amount of
mobile charged ions, including minerals, salts or metals
dissolved in a given volume of water. TDS, which is based
on conductivity, is expressed in parts per million (ppm) or
milligrams per liter (mg/L). TDS includes any conductive
inorganic element present other than the pure water
molecules (H O) and suspended solids.
2
TDS affects everything that consumes, lives in or uses
water, from fish and plants to plumbing and laboratories.
For people, the lower the TDS level in the water you drink,
the more efficiently your body's cells are hydrated. The
higher the TDS level in water, the greater the probability of
harmful contaminants that can pose health risks or hinder
the absorption of water.
The U.S. EPA's Maximum Contaminant Level of TDS for
human consumption is 500 ppm.
USE THE TDS-3 METER TO:
• Check the performance of your water filter.
• Be sure your drinking water is at the right TDS level.
• Measure TDS levels for other applications.
FEATURES
Wide Range: Accommodates most applications.
Auto Shut-Off: Shuts off automatically after 10 minutes to
conserve batteries.
Large Screen: Easy to see and share.
Hold Function: View the reading out of the water.
Thermometer: Measures temperature
Carrying Case: Protects your meter!
SPECIFICATIONS
TDS Range: 0-9990 ppm (mg/L)
o
Temp Range: 0-80 C
o
ATC: Yes (0-80 C)
Accuracy: +/- 2%
Calibration: Factory calibrated with NaCl 342 ppm;
adjustable.
Power: 2 x 1.5V button cell (357A)
Battery Life: Approx. 1000 hours
Dimensions: 15.5 x 3.1 x 2.3 cm (6.1x1.25x1 in.)
Weight: 76.5 g (2.7 oz) (with case)
USAGE INSTRUCTIONS
Battery Hold Temp Power
Compartment
Button Button Button
Sensor
LCD Screen Water Level Limit
Taking TDS Measurements
1. Remove the protective cap.
2. Turn the TDS meter on. The ON/OFF switch is located on the
panel.
3. Immerse the meter into the water/solution up to the max.
immersion level (2").
4. Lightly stir the meter to dislodge any air bubbles.
5. Wait until the display stabilizes. Once the reading stabilizes
(approx. 10 seconds), press the HOLD button to view the
reading out of the water.
6. If the meter displays a flashing 'x10' symbol, multiply the
reading by 10.
7. After usage, shake off any excess water from your meter.
Replace the cap.
Taking Temperature Measurements
1. Once the meter is on, the temperature function can be used at
any time, in or out of liquid.
2. Press the TEMP button. The display will switch to temperature
(in Celsius only).
3. To return to TDS mode, press the TEMP button.
Changing the Batteries
1. Remove the battery compartment.
2. Install new batteries (model 357A or L1154). Be sure the
batteries are properly aligned.
3. Replace the battery compartment. The meter will turn on
automatically.
Precautions
1. The meter is not water-tight. Do not dip the meter beyond the
water level limit. The warranty will be voided if water enters
the unit.
2. Do not store the meter in high temperatures or direct sunlight.
Damage to the unit caused by user error or carelessness will
void the warranty.
3. Do not attempt to open the housing or tinker with the
electronics of the unit. Any unauthorized work on the unit will
void the warranty.
4. Though durable, the TDS-3 is an electronic instrument and
should be treated with proper care and maintenance.
CALIBRATION
Your meter has been factory calibrated to a NaCl 342 ppm solution.
For information on calibration, visit
www.hmdigital.com/calibration_maintenance.html.
TEMPERATURE CONVERSION CHART
C F C F C F C
1 33.8 21 69.8 41 105.8 61
2 35.6 22 71.6 42 107.6 62
3 37.4 23 73.4 43 109.4 63
4 39.2 24 75.2 44 111.2 64
113
5 41 25 77 45 65
6 42.8 26 78.8 46 114.8 66
7 44.6 27 80.6 47 116.6 67
8 46.4 28 82.4 48 118.4 68
9 48.2 29 84.2 49 120.2 69
10 50 30 86 50 122 70
11 51.8 31 87.8 51 123.8 71
12 53.6 32 89.6 52 125.6 72
13 55.4 33 91.4 53 127.4 73
14 57.2 34 93.2 54 129.2 74
15 59 35 95 55 131 75
16 60.8 36 96.8 56 132.8 76
17 62.6 37 98.6 57 134.6 77
18 64.4 38 100.4 58 136.4 78
19 66.2 39 102.2 59 138.2 79
20 68 40 104 60 140 80
THREE YEAR WARRANTY
This product is warranted to the purchaser against material and workmanship
for three (3) years from date of purchase.
What is covered:
Parts and labor, or replacement at the company's option. Transportation
charges to the purchaser.
What is not covered:
Transportation charges to the company. Damages from abuse or improper
maintenance (see operating instructions and precautions). Any other
consequential damages, incidental damages or incidental expenses, including
damages to property. Some states do not allow exclusive or limitation of
incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
How to obtain warranty performance:
Include with the product your name, address, phone number, description of
problem, proof of date of purchase, company purchased from, and return to:
HM Digital, Inc.
5819 Uplander Way
Culver City, CA 90230, U.S.A.
Implied Warranties:
Any implied warranties, including implied warranties of merchantability and
fi tness for a particular purchase, are limited in duration to three (3) years from
date of purchase. Some states do not allow limitation on an implied warranty
length, so the above limitation may not apply to you.
To the extent any provision of this warranty is prohibited by law and cannot
be preempted, it shall not be applicable. This warranty gives you specific legal
rights and you may also have other rights, which vary from state to state.
F
CONTACT INFO
141.8
143.6
145.4
147.2
149
150.8
152.6
154.4
156.2
158
159.8
161.6
163.4
165.2
167
Distributed By:
168.8
170.6
172.4
174.2
176
www.appliedmembranes.com
ISO-9001
Designed in Korea. Made in China.
How Pure is Your Water?
TM
®