Powerfix Profi 298736 Instrucciones De Utilización Y De Seguridad página 45

may signal a finding, before it is over
the material. In this case mark the start
and end of the signalled area at the
indentation of the measuring head. The
middle of the sought object lies in the
middle between the two markings.
- Please note that metal objects are located
more readily the easier they can be
magnetized.
- This means that iron is detected at a sig-
nificantly greater distance than copper
for example.
- Please note that power lines can only
be detected as such, if they are carrying
voltage.
- Light switches must always therefore be
switched on, so that the conductor is car-
rying voltage. All the fuses must similarly
be inserted or switched on.
- Please note that only voltages of 230 V∼
50 Hz are detected.
The locating of concealed objects is the
same in all three modes (STUD = wood,
AC WIRE = live electric power cables,
METAL = metal).
1. Slide the function switch
"DETECTOR".
2. Slide the material switch
AC WIRE or METAL.
3. First of all, the appliance must be
calibrated. Place it flat against the
wall where you wish to search for
concealed objects.
4. Press and hold the PUSH button
until the signal tone hums. The appli-
ance has now adjusted itself to the
to
9
to STUD,
3
14
GB/IE 45