TP-Link AP300 Guía De Instalación Rápida página 12

English
Q2. What can I do if the login window does not appear?
• Change the computer's static IP address to obtain an IP address automatically.
• Verify if http://tplinkap.net or http://192.168.0.254 is correctly entered in the web
browser.
• Use another web browser and try again.
• Reboot your AP device and try again.
• Power off your host AP and enter http://tplinkap.net into the web browser to try
again.
Q3. How do I recover the AP device's web management password or retrieve my Wi-Fi
password?
• If you forget the password required to access the AP device's web management page
and your Wi-Fi password, you must restore the AP device to its factory default settings.
• If you forget your Wi-Fi password, but are able to access the AP device's management
interface, connect a computer or mobile device to the AP device via wired or wireless.
Log in and go to Advanced > Wireless > Basic Settings to retrieve or reset your Wi-Fi
password.
Q4. What can I do if my wireless is not stable?
It may be caused by too much interference, you can try the following methods:
• Set your wireless channel to a different channel.
• Move the AP device to a new location away from Bluetooth devices and other
household electronics, such as cordless phone, microwave, and baby monitor, etc., to
minimize signal interference.
Q5. What can I do to maximize my signal strength in Repeater/Bridge mode?
When choosing an ideal location to optimize wireless signal in Repeater/ Bridge
mode, please use the following recommendations.
• The Best Way is Halfway
Generally, the ideal location for the repeater is halfway between your wireless router
and your wireless clients. If that is not possible, place it closer to your wireless router
to ensure stable performance.
• Less Obstacles Ensure Better Performance
Choose a location with less obstacles that may block the signal between the AP
device and the host network. An open corridor or a spacious location is ideal.
Note: Upon resetting, all previous configurations
will be cleared, and the AP device will reset
to the default AP Mode.
10