Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Notes For BOTH Stand Alone and BUS modes:
1.
The sounder will not operate when a battery is not connected or no power supply is connected to the PS
terminals.
2.
After powering-up the sounder, it will not operate for a period of 20 seconds (sound and strobe) in order to
avoid accidental activation during installation.
3.
After powering-up the sounder, the sounder inputs (C+/C-) will cause activation only if they have been in
normal (silent) state at least for 10 seconds.
4.
The PROX and TRBL outputs are deactivated in BUS mode configuration.
5.
To protect the battery against deep discharge, the battery will be automatically disconnected below 10.5 VDC.
Technical Specifications
Input DC Power
Standby Current Consumption
Battery charging current
Operating Current Consumption
(Sounder + Strobe)
Speaker Sound level
Tone frequency
Strobe light
Strobe lens
Strobe flash rate
Back-up battery (rechargeable)
Low battery protection
Reverse Battery Protection
Ingress Protection
Operating Temperature
Humidity
Tamper contact
Proximity Anti foam contact
Housing material
Dimension (L x W x H)
Weight (without battery)
Compatibility
ProSYS compatibility
Standards
8
Figure 2: BUS Wiring
Regulated 13.5-14.2V, 200 mA maximum
54 mA + charge current
140 mA maximum
1.6A
100 dB @ 1 meter
1500-1800 Hz
Surface Light Technology SMT LED with 6000 mcd
Polycarbonate, available in amber, red or blue
60 times per minute (maximum)
SLA (Sealed Lead Acid) rechargeable 12V, 2.2 A/H, UL approved,
Max Size (L x W x H): 17.8 cm x 6.4 cm x 3.5 cm
Automatic disconnection below 10.5 VDC
Battery Charger Disconnected for Battery Voltages below 9V
IP 34, IK7
-25°C to 70°C (-13°F to 158°F)
95% maximum
0.1 A, 24 V, N.C. termination or internal EOL resistor
0.1 A, 24 V, N.C. termination
Polycarbonate with UV protection
30.5 cm X 21.8 cm X 11.6 cm
1.4 kg
All control panels
4-wire BUS, up to 300m from main panel
EN50131-4 Grade 2 Environmental Class IV
Capítulos
Tabla de contenido
