Vox Function; Pa Function; Talkback Level; Multistandard Mode - Pihernz JOPIX GS-60 Manual De Instrucciones

5.8.- VOX FUNCTION:

The VOX function allows transmitting automatically by speaking into the supplied
microphone without pressing the [PTT] switch.
Press [PTT] + [EMG] key to turn on VOX function, LCD displays microphone icon. Press
[PTT] + [EMG] key to disable VOX function. The microphone icon disappeared.
NOTE:
- When turn on VOX function, the microphone icon flashes. VOX sensitivity and
time setting refer to settings menu.

5.9.- PA FUNCTION:

This function allows you to select the mode of operation for public broadcasting.
Turn on PA mode: "PA" icon and modulation mode (AM/FM) flicker alternately.
The [ON/OFF/VOL] knob is used to adjust the audio level of mode PA.

5.10.- TALKBACK LEVEL:

This function allows you to adjust the volume of your walkie-talkie.
(1) Start the intercom function (see settings menu).
(2) Hold down the [PTT] switch, and then press the [UP] key to increases or the
[DOWN] key to decreases the Talkback Level.
(3) Release [PTT] switch to save Talkback Level.

5.11.- MULTISTANDARD MODE:

(1) Hold [AM/FM] key to power on the transceiver, until LCD displays the multistandard
mode.
(2) Short press the transceiver [▲] / [▼] key or microphone [UP] / [DOWN] key.
(3) Power off the transceiver and power on again.

5.12.- INSTALL EXTERNAL SPEAKER:

Choose an 8 Ω external speaker with 3.5 mm mono connector.

5.13.- SETTINGS MENU:

(1) Long press [EMG] key to enter settings menu list.
(2) Short press transceiver [▲] / [▼] key or microphone [UP] / [DOWN] key to choose
option to be set.
(3) Short press [EMG] key to enter function setting parameter of the chosen function,
the parameter blinks on LCD.
(4) Short press microphone [UP] / [DOWN] key or transceiver [▲] / [▼] key to choose
wanted setting.
(5) Short press [EMG] key to validate the parameter and exit setting.
(6) Long press [EMG] key or wait 10 seconds to store and exit menu.
English - 8 -