One Touch Select Manual Del Propietário página 46

3. Match the code on the meter with the code
on the test strip vial
If the code on the meter does not match the
code on the test strip vial, press
match the code number on the test strip vial.
The new code number will flash on the display
for three seconds, then briefly stop flashing,
after which the display will advance to the
SAMPLE
If the codes already match, press
APPLY SAMPLE
change after five seconds, the display will
advance to the
4. Mark the test as a control solution test
Press
CONTROL
apply control solution. Once you have completed
the test, you cannot change the marking.
The meter is now ready to perform a control
solution test.
40
screen.
screen. When you do not make a
APPLY SAMPLE
to change
APPLY SAMPLE
. You must mark the test before you
or to
APPLY
to go to the
screen.
to
APPLY