Yota RUBY Manual Del Usuario página 11

The First Switch On
1. The router requires SIM-card with the appropriate standard (4G or 3G),
provided by the network operator. (Illustration #5)
2. Open the USB swivel mechanism (Illustration #6)
3. Push microSIM-card in the slot until you hear "click" (Illustration #7)
4. Turn the power switch to the «On». (Illustration #9)
5. Connect to "Yota Ruby" Wi-Fi network.
6. Start on your browser and go to
router.
7. When first turned on, type a new name for Wi-Fi network, select the type
of encryption and create a password on the page «Mobile Router Setup».
8. Connect to the new Wi-Fi network manually
All settings and status are available on
Note:
Do not remove the SIM-card in while in use. Otherwise, it may cause damage
to the card or router, as well as damage to or loss of data which are stored
on the card.
http://status.yotaruby.com/
http://status.yotaruby.com/
to set up your
11/80