Introduction; Product Specifications; Instructions For Use; Assembly - Cuisinart SG6BE Instrucciones

2. INTRODUCTION

Congratulations on your purchase of a new Cuisinart salt and pepper mill.
For over 30 years Cuisinart's aim has been to produce the very finest kitchen
equipment. All Cuisinart products are engineered for exceptionally long life,
and designed to be easy
to use as well as to give excellent performance day after day.
To learn more about our products and for recipe ideas visit our website www.
cuisinart.eu

3. PRODUCT SPECIFICATIONS

1.Measuring Cap
Grind directly into the cap - perfect for measuring quantities for a recipe.
2. Removable Grinding Containers
Clear for easy viewing, and hold large portions for less refills
3.On/Off Button
Operates mill when pressed
4.Charging Base
Plugs into mains outlet to charge the unit
5.Grind Tray
Removable tray catches loose grinds for easy disposal
6.Charge/Ready Light
Illuminates red when charging and blue when fully charged
7.Adjustable Grind Dial
Choose from 5 set positions from coarse to fine
8.Grind Directional Arrows
Indicates which direction to turn the adjustable grind dial for desired setting

4. INSTRUCTIONS FOR USE

A. ASSEMBLY
• Place housing and all removable parts on a clean, flat surface. Make sure that
all parts have been cleaned and dried thoroughly before assembling.
• Attach grinding container(s) to the unit housing. NOTE: It is best to attach the
grinding container from the bottom while holding the unit upright (see Fig.1
in the cover).
• Line up the arrow on the grinding container with the arrow on the unit
housing (Fig.2). NOTE: Both arrows should face each other. This will indicate
the grinding container and unit are properly aligned.
• Gently push the grinding container and unit housing together. The grinding
container will fit together comfortably with the unit housing (Fig.3).
• Secure the grinding container in place by twisting the grinding container so
that the arrow on the unit housing is now aligned with the lock symbol on the
grinding container (Fig.4). NOTE:The two pieces will click together indicating
proper assembly.
(refer to cover)
12