Akasa all in one 2 Instrucciones De Instalación página 5

4. Motherboard connections
WARNING:
Make sure you connect USB, IEEE 394 and AUDIO cables to the correct
motherboard headers. If the headers are not labelled please consult
the motherboard manual. Using wrong connectors will result in
motherboard damage.
 Connect the SATA cable to the
SATA header on the motherboard.
 Connect the card reader and
USB ports cable to the USB pin
header on the motherboard.
3 And connect the internal 394
cable to the IEEE 394 header
on the motherboard.
7
USB
1394
4 Connect the audio cable to the
motherboard audio connector.
Use HD or AC'97 connector
depending on the motherboard
type and BIOS setting.
Internal Card Reader
The card reader is a Plug&Play device and it doesn't require driver
installation for Windows 000/XP/VISTA.
To operate the card reader insert the card into corresponding port
in the direction matching the port shape.
WARNING:
Never remove your flash cards when copying data. Doing so may result
in data loss.
8