Charging The Unit - Sangean BluTab BTS-101 Instrucciones De Manejo

Charging the unit

This unit operates on a built-in Li-on battery that can be recharged
either using the USB charging port or from a USB power adaptor (not
included) with a rated output of DC 5V, 000mA.
The first time using your BluTab (BTS-0) speaker, connect it to DC
(mains) power and fully charge the battery. When the battery is charging
in progress, battery charging indicator is in solid red. After the battery is
charged fully, the red battery charging indicator will turn off.
Note:
You can begin using the speaker while charging. Please be aware that
in this case make sure the USB power source can provide 5V A of
electrical current. If not, it may damage the USB power source.
. Connect the (supplied) micro USB plug to the micro USB charging
port on the right hand side of the unit.
2. Connect the (supplied) standard USB plug end of the cable to a power
USB port on a computer or other USB charging device. When the
battery is charging, the battery indicator illuminates in steady red light.
If the indicator fades away indicating the battery is fully charged and
the battery charging is stopped.
Power on the speaker
Before power-on the speaker, make sure to set the power lock to its off
position.
There are two ways to power on your speaker.
● You can press and hold the Power button to turn on the speaker.
● In addition, the speaker can be powered on via NFC: Turn on your NFC
feature on your NFC-enabled device > Hold your NFC-enabled device
directly against BluTab's NFC tag for 2 seconds. Once the speaker is
powered on successfully, the speaker will make a sound to confirm.
Note:
some devices may ask for confirmation from the user.
3