Care And Maintenance; Troubleshooting - Master Forge FL-6002H-2S Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4. Place a shallow drip pan underneath the food to catch drippings and make for easier cleanup.
5. Plug the unit into an electrical outlet. Turn the power switch to the "ON" position to start the
rotisserie motor. To begin, turn burners to the lowest setting.
6. Check for constant speed of the rotisserie rod. If the rod does not turn at a constant speed,
reposition the food on the forks and adjust the weight so it is balanced on the rod. An unbalanced
rotisserie rod will damage the motor.
7. Check food frequently and adjust burner temperature based on observations. This will require
some experimentation as each grill has different heating and cooking characteristics.
NOTE: Do not attempt to use rotisserie on a two (2) burner grill because of insufficient heat from a
single burner and difficulty in balancing the rotisserie rod.
Follow steps as outlined above except do not use the main burners directly below the food on the
rotisserie rod. Using these burners will burn the food and may cause dangerous flare ups.

CARE AND MAINTENANCE

Turn off, unplug, and remove the rotisserie kit when not in use. After using, clean all metal parts by
wiping clean using a damp rag. Do not immerse any parts in water. Wipe completely dry before
storing. Store in a dry place.

TROUBLESHOOTING

Problem
The rod is not rotating
at a constant speed
Possible Cause
1. Food is not balanced on the forks.
2. The counterweight is not adjusted.
1. Reposition the food on the forks
and rod to adjust the weight so
that it is balanced.
2. Adjust the counterweight to
balance the rod.
8
Corrective Action
Tabla de contenido
loading

Productos relacionados para Master Forge FL-6002H-2S

Este manual también es adecuado para:

0101484

Tabla de contenido