Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

1. Introduction & Features
Thank you for buying the TELES1! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will
not accept responsibility for any ensuing defects or problems.
• Damage caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people or children less than 8 years of age. Any damage will most probably be due to improper use of the device.
• Protect the device against extreme heat, dust and moisture.
• Use the original packaging if the device is to be transported.
• Do not look at the sun through the TELES1 ; this may result in serious injury to your eye.
3. Parts of the Telescope
1. Focusing Knob
2. Focusing Tube
3. Diagonal Mirror
4. Eyepiece
5. Finderscope
6. Telescope Main Body
7. Tripod Legs
8. Tripod Leg Locks
9. Tripod Leg Braces
10. Tripod Centre Post
11. Azimuth Lock
12. Alt-azimuth Adjustment
13. Erecting Eyepiece / 21X Microscope
14. Objective
4. Maintenance
The objective lens (14) of the TELES1 must be cleaned with care and as seldom as possible to avoid affecting its
precision and performance. An inexperienced person must never take a lens out of its mount.
First try to remove the dust with a soft brush or by blowing. Moisten a piece of clean cotton with a few drops of ether
or isopropyl alcohol and wipe the lenses very delicately, avoiding a circular motion.
If possible, avoid taking the telescope from cold outside air into a warm room. This will cause the objective lens to be
covered with condensation, which must be removed at once. To do this, place the telescope at a safe distance from
any heat source and let it warm slowly until the condensation has vanished. Any stains left on the lens must be
delicately wiped off when the lens is completely dry.
TELES1
TELES1 – TELESCOPE 50mm
1
VELLEMAN
Tabla de contenido
loading

Resumen de contenidos para Velleman TELES1

  • Página 10: Mantenimiento

    14. Óptica 4. Mantenimiento Limpie la óptica (14) del TELES1 cuidadosamente y lo menos posible para evitar que su precisión y potencia se afecten. Una persona inexperimentada nunca puede sacar el objetive del soporte. Primero, intente quitar el polvo con un cepillo suave o soplando. Humedezca un paño de algodón limpio con algunas gotas de éter o alcoholo isopropyl y frote cuidadosamente la óptica al evitar movimientos circulares.
  • Página 11: Montaje

    2. Introduzca el ocular (4) en el espejo diagonal (3). Fije el pequeño tornillo de fijación. Montar el sistema convertidor (fig. D): 1. Se ha incluido un sistema convertidor para utilizar el TELES1 como telescopio terrenal. El sistema está provisto para corregir la imagen invertida que produce un telescopio astronómico.
  • Página 12: Especificaciones

    Esto no facilita la búsqueda de una estrella o planeta especifico. Para facilitar la búsqueda de objetos, el TELES1 está equipado con un buscador: un pequeño telescopio con baja potencia y un retículo con un campo visual mucho más grande que el del telescopio principal. Si el buscador está...

Tabla de contenido