ITW DUO-FAST HT-755 Classic Manual De Instrucciones De Operacion Y Seguridad página 10

Top Load Design with Pusher Lock:
1) Hold the tool upright and disconnect the air supply.
2) Pull back on nail pusher in magazine until it locks in the
rear position.
3) One at a time, drop strips of nails through slot in top of
magazine.
4) While pulling back on nail pusher, release locking lever
(located on the rear of the magazine) with thumb.
5) Holding onto the nail pusher gently allow it to move
forward to engage the nail strip in the magazine.
NOTE: Make sure that the head of the nail is under the pusher.
Failure to do so may result in misfeeding.
!WARNING!: Failure to release the nail pusher may result in
improperly driven nails or jamming. Be sure to release the nail
pusher before operating the tool!
7) Hold the tool upright and connect the air supply hose.
10