Tabla de contenido
Netzstecker und mit einem trockenen Tuch durchführen.
HAFTUNGSAUSSCHLÜSSE
Die in dieser Bedienungsanleitung enthaltenen Informationen können ohne Vor-
ankündigung geändert werden. ANSMANN übernimmt keine Haftung für direkte,
indirekte, zufällige oder sonstige Schäden oder Folgeschäden, die durch unsach-
gemäße Handhabung oder durch Missachtung der in dieser Bedienungsanleitung
enthaltenen Informationen entstehen.
GARANTIEHINWEISE
Auf das Gerät bieten wir eine zweijährige Garantie. Bei Schäden am Gerät, die infolge
Nichtbeachtung der Bedienungsanleitung entstehen, kann keine Garantie gewährt
werden.
Technische Änderungen und Irrtümer vorbehalten. Für Druckfehler übernehmen wir
keine Haftung 04/2014
[GB]
Instruction Manual Working Lamp WL250R
FOREWORD
Dear Customer,
Thank you for purchasing the ANSMANN Working Lamp WL250R. These operating in-
structions will help you to get the best from your lamp. We hope you will be happy
with this product.
Your ANSMANN Team
SAFETY INSTRUCTIONS
▪ Please read these operating instructions carefully before using the lamp and its
power supply!
▪ Do not use the device if there are any signs of damage to the housings, plugs or
cables. If you do find any damage to any part of the unit, please contact an
authorised dealer!
▪ Keep the lamp in a dry place away from direct sunlight!
▪ In order to avoid the risk of fire and/or electric shock, the lamp must be protected
against high humidity and water!
▪ Before cleaning the unit, disconnect it from the mains and only use a dry cloth!
▪ Never attempt to open the lamp or power supply! Repair work and changing of the
battery pack should only be carried out by professionally trained service
engineers. Only original replacement parts should be used.
▪ Keep out of children's reach! Children should be supervised to ensure that they do
not play with the lamp or mains power supply!
▪ The device is not to be used by children or people with reduced physical, sensory
or mental capabilities. In addition, novice users who have not fully read these
instructions should be supervised or given instruction before use!
▪ If the safety instructions are not followed, it may lead to damage to the unit and
could cause injury to the user!
FUNCTIONAL OVERVIEW
▪ Professional Working Lamp with the latest Chip-On-Board (COB) LED technology
▪ Spotlight on top of the housing
▪ Robust and splash-proof plastic housing with rubberized surface
▪ 180° rotatable, in eight steps lockable lamp handle for a flexible light alignment
▪ Two extendable, 360° rotatable hooks on the back side of the housing
▪ Two magnets on the back side of the housing and one magnet on the bottom of
handle
▪ Built-in NiMH battery pack (3.6V / 1600mAh)
▪ Rechargeable via AC-DC mains power supply (100V-240V) or car adapter (12V-24V)
▪ Charging and residual capacity indication via DUO-LED
TECHNICAL DETAILS
Integrated lights:
Illuminance:
Luminous flux:
Operating time:
Input voltage external power supply:
Input voltage car adaptor:
Charging current:
Charging time:
OPERATION
The on/off switch of the Working Lamp is located on the front side of the housing:
▪ Press 1 time: The Spotlight on top of the housing is switched on.
▪ Press 2 times: The Spotlight is switched off and the Main Lamp is switched on.
▪ Press 3 times: Both Spotlight and Main Lamp are switched off.
CHARGING PROCESS
Before first use, the lamp should be fully charged. The lamp should also be fully
charged before being stored for a longer period of time.
The following charging options are available:
▪ Via AC/DC mains power supply plugged into a mains socket
▪ Via car adapter in the cigarette lighter socket of a car/truck
To charge the lamp, remove the rubber cap from the hollow plug socket on the back
side of the Working Lamp and insert the round plug of the AC/DC power supply or
car adapter. Then connect the AC/DC power supply/car adapter to a mains socket/
cigarette lighter socket.
Charging indication via DUO-LED:
▪ Battery is charging: The LED lights red
▪ Battery is fully charged: The LED lights green
Residual capacity indication via DUO-LED:
▪ At a low residual battery level the LED lights red
Main Lamp: 3W COB LED
Spotlight: 7x 5mm LED
240 lux / 0.5m distance
250 lumens
approx. 2h (main lamp), approx.
13h (spotlight)
100-240V AC / 50-60Hz
12-24V DC
12V / 500mA
approx. 3.5h
Tabla de contenido
