Installing The Backguard; Connecting The Gas Supply - mabe JEM5110T Manual De Uso Y Cuidado

2.3 Installing the backguard (see features by model chart
at end of the manual).
Place the backguard behind the
cover and make sure that the
1
fireplace of the stove enters
through the "window" that brings
the backguard on the bottom.
Set the backguard using the two
head screws. The head screws
2
must enter through the lower
perforations of the back of the
backguard and must be screwed
against the cover.
Place the backguard on the back
1
of the cover and make sure that
the holes in both pieces match.
Set the backguard using two head
2
screws with its vise and screw.
One head screw and one vise with
screw on each side.

2.4 Connecting the gas supply

Make sure your home has a gas pressure regulator that provides the correct
pressure.
DO NOT USE PLASTIC HOSES TO CONNECT THE GAS
SUPPLY AS THEY COULD LEAK, EVEN BRAIDED FLEXIBLE
STEEL HOSES.
Picture 1
Picture 2
45