Oxygen audio PULSION 12.1 Manual Del Usuario página 31

3. During FM auto searching, press
the radio stations.
4. Press the buttons
control to listen to the various radio stations which are saved in memory.
5. Press FM+/FM- buttons on remote control to increase/decrease 0.1MHz
each time to search radio stations manually.
Remark: The radio channels which are searched manually could not be
saved.
9. USB/SD operation
Connecting a USB device or a SD card
1) Power-on the unit.
2) Insert a USB key / SD card to the interface.
3) When a USB/SD device is connected to the unit, press the MODE
repeatedly on the unit or press USB/SD on the remote to select USB/SD
mode.
4) Press stop key
Remark: Depending on the capacity of the device, the reading can take more
than 1 minute.
The unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to switch
on the USB device before it can operate.
- This unit does not support a direct USB connection with a computer. You
need to use a USB device, a MP3 player or a PMP (Portable Multimedia
Player with hard disk).
- If you are using a USB external hard disk: you need to connect your
device simultaneously to an external power source and to the unit. If you
are using a self-powered PMP, make sure that the battery is sufficiently
loaded.
- Check that the files system of your USB device is formatted into the FAT
or FAT 32 format. USB device formatted into NTFS are not compatible
with this unit. Caution: if you attempt to modify your file system,
formatting your device will erase all data. Please refer to your USB
device's instruction manual first.
/ on the unit, or the keys
on remote control to stop audio playing.
- 30 -
button on the unit to stop searching
/ on the remote