2. Move the valet toggle switch to the "on" position. The dash mounted L.E.D. will turn
on solid, and remain on as long as the system is in the valet mode.
3. To return to normal operation, move the valet switch to the "off" position any time the
ignition is on.
In the event you lose your keychain transmitter, or if the transmitter fails to disarm the system,
the valet switch can be used as a system override switch. Open the car door (the alarm will
sound). Turn the ignition key on, and move the valet switch to the "on" position. The alarm
will stop sounding, and the vehicle can now be started.
NOTE: Always remember to move the Valet Switch back to the "off" position. This will
ensure that the vehicle remains protected at all times.
REMOTE PANIC OPERATION (CHANNEL 1) :
The arming button on your keychain transmitter also functions as a "panic" switch for instant
activation of the alarm in emergency situations. To use the remote panic switch;
1. Press and hold the arming button on the keychain transmitter for 3 seconds or more. The
alarm will immediately sound.
2. To stop the alarm, press and release the arming button on the keychain transmitter. If
the button is not pressed, the alarm will automatically stop after 60 seconds.
WARNING! Excessive pressure on the transmitter buttons will damage the internal
components on the circuit board. All that is required is a light push to the button.
TRUNK RELEASE (CHANNEL 2) :
This security system has an on-board trunk release relay, that will activate the existing factory
installed electronic trunk release switch.
To remotely open the trunk, press and hold button #2 on the keychain transmitter for 3 to 4
seconds.
NOTE: This feature will not operate when the vehicles ignition key is turned "ON".
ADDITIONAL REMOTE FUNCTION (CHANNEL 3) :
This security system has an additional feature that can be wired to a number of different
optional accessories. Some of the more common uses for this "channel" are;
* Remote Car Starter - available for most automatic transmission, fuel injected vehicles.
* Remote Window Roll Up - available for most vehicles equipped with power windows.
To activate the optional accessory;
1. Press and release both buttons on the keychain transmitter simultaneously.
2. The optional accessory that has been wired to CHANNEL 3 will now engage.
Page 4
128-4243B
5 of 20