Ashley Signature P456-776B Guia Del Usuario página 9

4. Take out the door and place the LP tank in the bottom frame. Connect the regulator as
shown in Figure 6.Screw the black handle clock-wise to tighten. Turn the handle
counterclock-wise to remove. The hose must point down. Open the control door and
check that the valve is turned all the way clockwise to the "OFF" position. Open the tank
valve. Apply a solution of soapy water to the tank-regulator connection and to the
valve-hose connection to check for leaks. If soap bubbles continue to form, the
connection has a leak. If a leak is found, close the tank valve and tighten all connections.
!
WARNING
NEVER USE A FLAME TO CHECK FOR LEAKS AS DOING DO CAN
CAUSE AN EXPLOSION OR FIRE RESULTING IN PROPERTY DAMAGE, SERIOUS
BODILY INJURY OR DEATH.
C
Figure 6
5.Tighten threaded knobs found on tank tray (Figure 7) so that the LP tank can not move
from side to side. Do not remove plastic cap from end of threaded section.
Figure 7
Page 9 of 12
P456-776B/T