Routine Care Of Vacuum Cleaner; Replacing Secondary Hepa Filter; Changing Dust Bag - Panasonic Quickdraw MC-UG502 Instrucciones De Operación

Tabla de contenido

ROUTINE CARE OF VACUUM CLEANER

Performing the following tasks will keep your new Panasonic vacuum cleaner operating at
peak performance levels and will ensure these high levels for years to come. Check the
BEFORE REQUESTING SERVICE section in this manual for recommendations on performing
some of these tasks to help solve various problems that may occur.
Secondary HEPA Filter
(White Side Up)
Filtre secondaire de type HEPA
(Côté blanc sur le dessus)
Filtro de HEPA Secundario
(Blanco hacia arriba)
Always operate vacuum cleaner with genuine Panasonic type dust bags installed. Panasonic
dust bags may be purchased through any authorized Panasonic dealer or ordered from
service company.

Replacing Secondary HEPA Filter

Rib Projections
Lengüetas
Rainures

Changing Dust Bag

➢ ➢ Secondary HEPA filter protects the
motor.
➢ ➢ Check filter when installing a new
dust bag.
➢ ➢ If dirty, pull filter from bottom of dust
compartment and replace.
➢ ➢ Place new filter, white side up, in
dust compartment, DO NOT CLEAN
WITH WATER*.
➢ ➢ Ensure filter is fully inserted under
plastic rib projections.
*Filter cannot be cleaned and should be
replaced at least once each year.
➢ ➢ Lift latch to release dust cover.
➢ ➢ Pull outward to remove dust cover.
➢ ➢ Remove dust bag by grasping
cardboard portion and pulling out.
- 24 -
Tabla de contenido
loading

Tabla de contenido