10.6 Wireless Connection; Connecting A Memory Card; 10.8 Connecting An External Device - JP ClassMate PC SLIDES201t Manuel Del Usuario

To remove an app, right click on the app you want to remove from
the Start menu/taskbar. Next click on the "Unpin from Start" or
"Unpin from taskbar" to remove the app.
10.6. Wireless connection
To enable the wireless connection, open the settings menu and se-
lect the "Network & Internet" option.
• Select "Wi-Fi" and set it to ON. Make sure that the Airplane mode
is disabled, so that the Wi-Fi connection can work. To confirm
that Airplane mode is disabled, go to the desktop and check
the notication area. If you see an airplane icon displayed on the
lower right, please disable the Airplane mode first.
Once the wireless connection has been enabled,
the device will automatically scan for a wireless
network and display it in the network list. To
connect to the desired network, just click on the
name and then on "Connect".
Note:
Some networks require a network security key or password for connection. If nec-
essary, ask the network administrator or the Internet service provider (ISP) for the
required information.
BACK TO INDEX

10.7. Connecting a Memory Card

You can utilize the Micro SD Cards as removable disks and exchange data with digital
devices such as digital camera, camcorder, MP3, etc.
To insert the micro SD card follow the below steps:
• Insert the micro SD card as shown in the image;
• Follow the message on the screen, and choose to
open and view files;
• A Windows Explorer runs and shows all the folders and
files in the micro SD cards, and you can save, move and
delete data as you are handling a storage device.
To remove your memory card:
• Press the card and release. The card will pop up;
• Pull the card out by holding the end of the card.
10.8. Connecting an External Device
Connecting to the USB port
The device comes with one USB 2.0 port compatible with USB devices.
Once you plug a USB device into an USB port, Windows automatically loads a
driver for that device.
After the driver has been loaded one time, you can disconnect and reconnect the
same device without performing any additional steps.
Note:
If Windows requires you to install the driver before connecting, check the documen-
tation provided by the device's manufacturer before connecting the device.
To disconnect a USB storage device, make sure you click the Safely Remove Hard-
ware icon in the notication area of the taskbar. As well make sure that all data
transfer has finished.
Finally, a notication will be displayed allowing you to remove the device.
15