RS Pro RS-9883M Manual De Instrucciones página 7

6 in 1 Particle Counter / English
8-3.HCHO Setup mode
On the HCHO mode, you can see
button, press F3 can enter the Setup mode, on this mode, you can setup any parameter you want. Use
the or button to select any option you want to setup. Then press ENTER button to confirm the
parameter.
• Start Delay
Set the waiting time before the start of measurement. Press ENTER button to select the time and adijust
the time with the or button.
• HCHO Alarm
Set the alarm value of HCHO. Optional alarm off and turn the alarm function. You can set the size of the
alarm parameters.
• Max/Min
Set to display either Maximum and Minimum.
10
icon, and these icon corresponding to F1,F2,F3
05/04/2018 Version No. 001
• Average/Dif
Set whether to display the value of average/dif.
• Ambient Temp/%RH
Set whether to display the air temperature and relative humidity.
• Dewpoint/Wetbulb
Set whether to display the dewpoint and wetbulb.
3
• Units(ppm/ mg/m )
05/04/2018 Version No. 001
6 in 1 Particle Counter / English
11