Troubleshooting - CYBEX CP-21072 Manual Del Propietário

Troubleshooting

PLEASE READ AND FOLLOW THE SAFETY INSTRUCTIONS IN CHAPTER 1 OF THIS MANUAL BEFORE
ATTEMPTING ANY MAINTENANCE.
No Power
• Check to make sure that the AC Plug is properly plugged into the AC socket.
• Check to make sure that the AC Plug is properly plugged into the AC adaptor.
• If the AC Plug has a fuse, check to see if the fuse is blown.
• Check to see if the DC Lead from the Power Adaptor is properly plugged into the screen.
• Check the green LED on the Mains Adaptor is illuminated.
• Repeat the test in an AC Socket that is known to work.
No Picture and Sound
• Ensure that the monitor is plugged in and that the power is on.
• Ensure that the aerial/cable source is connected.
• Ensure the monitor is tuned in.
• Try a different program.
Poor Picture Quality
• Check the aerial/cable source connections.
• Check that the channel is tuned properly.
• Adjust the picture settings: brightness, color, sharpness, contrast, hue.
• Make sure that the monitor is not located close to electrical appliances that may emit radio frequency interference.
No Headphone Sound
• Check the RJ-45 cable from the Fitness Equipment C-Safe Port to the Monitor Fitness Equipment Port is connected.
• Check the RJ-45 cable from the Fitness Equipment C-Safe Port to the Monitor Fitness Equipment Port is not
damaged.
• Check that the monitor has power.
• Check the Fitness Equipment Console Internal Audio Cable Assembly is connected.
• Check the Fitness Equipment Console Headphone Jack – This is a wearable part and may need to be replaced.
• Repeat the test with new headphones.
No Color
• Adjust the color setting.
• Check that the program is broadcast in color.
• Check that the channel is tuned properly.
Monitor Does not Respond to Remote Control
• Check that there are no obstructions between the remote control and the monitor.
• Check that the remote control is within range of the monitor.
• Check the remote control batteries are inserted correctly
• Replace the remote control batteries.
Monitor Does not Respond to the Fitness Equipment Media Controls
• Check the RJ-45 cable from the Fitness Equipment C-Safe Port to the Monitor Fitness Equipment Port is connected
at both ends.
• Check the RJ-45 cable from the Fitness Equipment C-Safe Port to the Monitor Fitness Equipment Port is not
damaged.
• Check the monitor has power.
• Test the controls while the Fitness Equipment is being used – i.e. during a workout session.
Pixels
• Very small red, blue, white or green spots appear on the screen. This is a characteristic of liquid crystal display panels
and is not a problem. The liquid crystal panel is built with very high precision technology giving fi ne picture details. Oc-
casionally a few non-active pixels may appear on the screen as a fi xed point. NOTE: This does not affect the perfor-
mance of the monitor or merit a warranty claim.
6-2