Setup; Connecting To A Deskphone; Without A Headset Port; With A Remote Handset Lifter - Spracht ZuM Maestro DECT Guía De Usuario

Setup

Connecting to a Deskphone

Phone With a Headset Port (RJ09)
Check whether your desk phone has a dedicated headset
port (usually at the back of the phone). These phones
typically have a button on the front panel for switching
between handset and headset.
1. Plug the supplied telephone cable into the port marked
 on the base.
2. Connect the telephone cable to the headset port on
the desk phone.
Phone Without a Headset Port
If your desk phone does not have a dedicated headset port:
1. On the desk phone, unplug the handset cable from the
phone body.
2. Connect the handset cable to the port marked on
the base.
3. Plug the supplied telephone cable into the port
marked  on the base.
4. Connect the telephone cable into the handset port on
the desk phone.
Deskphone With a Remote Handset Lifter
If you have a Handset Lifter which physically lifts the
desk phone handset to make or answer a call, check the
mounting instructions in the documentation that came
with the Handset Lifter.
1. On the desk phone, unplug the handset cable from the
phone body.
2. Connect the handset cable to the port marked
the base.
3. Plug the supplied telephone cable into the port marked
 on the base.
4. Connect the telephone cable into the handset port on
the desk phone.
5. Connect the Handset Lifter cable into the port marked
AUX on the base.
Spracht®
on
1