Security Related Information; Conformity Of The Product With Legislation; Storage Of The Manual; Use Of The Product / Installation - shada OUTDOOR Serie Manual De Instalación Y Operación

Tabla de contenido

Idiomas disponibles

LED's light

OUTDOOR SERIES

Security related information

When using the product, make sure the unit is sufficiently ventilated, never cover the unit

during operation and keep it out of reach of children or animals. This product is not a toy,

LED lights are extremely bright and looking directly at the light source during operation

can lead to serious eye damage. Any other use of the device than described in the manual

may damage the product or cause danger to the user, e.g. due to a short circuit, fire or

electric shock. The safety instructions must be observed at all times.

The warranty expires in the event of damage due to non-compliance with the safety in-

structions of the device. Furthermore, we are not liable for consequential damage, damage

to objects or persons resulting from failure to observe the safety instructions and improp-

er use/handling of the device due to wear and tear. Product design and specifications are

subject to change without notice. All logos and trade names are registered trademarks of

their respective owners and are hereby acknowledged as such.

Please read the operating instructions carefully and completely before use. The operating

instructions are part of the product, they contain important information on the commis-

sioning and handling of the device. Keep all enclosed operating instructions for future

reference. If the device is sold or passed on to third parties, you are obliged to pass on the

operating instructions as these are lawfully part of the product.

Before use, check the completeness of the parts supplied and the intactness of the prod-

uct. If damaged, it must not be put into operation.

This product may only be installed by a qualified technician

Installation (see also instructions on p.7-9):

1. turn off mains voltage.

2. take precautions against accidental re-activation by third parties

3. verify that the contacts are power-less.

4. follow the Installation-steps on the drawings

Attention! When the LED's keep glowing slightly, verify that you made the correct connec-

tions (L/L en N/N).

The safety instructions and warnings must be observed to ensure both the perfect condi-

tion of the product and safe operation.

The product can be cleaned with clear water and a soft cloth. Do not use detergents con-

taining surface active agents or scouring agents.

Tabla de Contenido

Tabla de contenido

300780 300781 300782