Idiomas disponibles
Idiomas disponibles
7. Adjusting Sensitivity ‑ The sensor is adjusted at the factory to turn on when hands are 4‑6 inches away from the
bottom of the dryer. To INCREASE SENSITIVITY turn the pot CLOCKWISE up to 1/3 TURN MAX. To DECREASE
SENSITIVITY turn the pot COUNTERCLOCKWISE up to 1/3 TURN MAX. See Figure 3.
8. Carefully replace the cover using (2) tamper‑proof screws supplied. Apply a bead of caulk around edges of cover to
wall.
9. Notes ‑ The dryer incorporates a non‑self‑resetting thermal cut‑out that is reset by disconnection of the supply
mains.
Quieter
F
2 - A
s
igure
djusting
ound
The dryer is shipped set at maximum speed. Turn
counterclockwise to reduce sound and speed. 3/4
of a turn max.
F
4 ‑ p
igure
Arts
ITEM
PART NO.
1
GXT202
2
GXT202‑M
3
GXT202‑BG COVER, BLACK STEEL*
4
GXT202‑SS
5
GXT212‑A
6
GXT216
7
GXT218
8
SM239
9
GB232
* Must specify complete model number
** CPC & GXT Only
Faster
Screwdriver
& s
peed
L
ist
DESCRIPTION
COVER, WHITE ABS*
COVER, WHITE STEEL*
COVER, STAINLESS STEEL*
NOZZLE ASS'Y
MOTOR/BLOWER
HEATING ELEMENT**
SMART SENSOR COMPLETE
SECURITY SCREWS & WRENCH
‑ Sensitivity
Screwdriver
F
3 - A
igure
djusting
Place the screwdriver through the access hole as
shown to adjust sensitivity. Range is set at the
factory for 4 ‑ 6 inches (100‑150mm).
1
2
3
4
+ Sensitivity
s
ensitivity
6
5
9
8
7
