Tabla de contenido
IMPORTANT
SAFEGUARDS
When using an electrical appliance, basic safety
precautions should always be taken, including
the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handle.
3. To protect against fire, electric shock and
injury to persons, DO NOT IMMERSE CORD,
PLUG OR BASE UNIT in water or other
liquids.
4. Close supervision is necessary when any
appliance is used by or near children.
5. Unplug from outlet when not in use and
before cleaning. Allow to cool before putting
on or taking off parts, and before cleaning
appliance.
6. Do not operate any appliance with a
damaged cord or plug, or after the appliance
has malfunctioned or has been damaged in
any manner. Return appliance to the nearest
Cuisinart Authorized Service Facility for
examination, repair or adjustment.
7. The use of accessory attachments not
recommended by Cuisinart may result in fire,
electric shock or injury to persons.
8. Do not use outdoors.
9. Do not let power cord hang over edge of
table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric
burner, or in a heated oven.
11. Always attach the plug to the appliance
first, then plug cord into wall outlet. To
disconnect, push switch to Off, then
remove plug from wall outlet.
12. Do not use appliance for other than
intended use.
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY
13. Scalding may occur if the lid is removed
during the heating cycle.
14. Do not operate your appliance in an appliance
garage or under a wall cabinet. When storing
in an appliance garage, always unplug the
unit from the electrical outlet. Not doing so
could create a risk of fire, especially if the
appliance touches the walls of the garage or
the door touches the unit as it closes.
FOR HOUSEHOLD
USE ONLY
SAVE THESE
INSTRUCTIONS
WARNING: RISK OF FIRE
OR ELECTRIC SHOCK
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of fire or electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
DO NOT OPEN
2
Tabla de contenido
