Grounding Test - Orbis VIARIS Manual De Instrucciones

Connecting the real charge to the charger
Using the test terminals ④ located at the same distance as a standard
Schuko pin, a charge can be connected such as a heater or an electric
drill, to provoke a real flow of current to the charger.
WARNING: THE CHARGE CONNECTED TO THESE TERMINALS
MUST NOT BE MORE THAN 8 A / 1800 W.
A grounding terminal is also available ⑤ to test the charger grounding.

Grounding test

The Viaris Tester continuously tests the grounding quality. If the
installation grounding is correct, a green icon will be shown on the
display.
If, on the contrary, it is in poor condition, a red indicator lamp will flash
on the display, indicating that the installation grounding must be
checked.
Poor grounding will make it impossible for the electric vehicle to charge
and return an error.
9