Programming; Program Pin - Chamberlain 940EV Manual De Usuario

Programming

PROGRAM PIN

Press and hold the and
1 *
lights on the keypad stop blinking.
2
Enter a 4-digit personal identification
number (PIN) of your choice, then press
the # button.
3 Press and release the ENTER
Keyless Entry the number of times that
corresponds with your garage door opener
type:
GARAGE DOOR OPENER TYPE
Yellow Learn Button (315 and 390 MHz Security+ 2.0
Purple Learn Button (315 MHz Security+
Red/Orange Learn Button (390 MHz Security+
Green Learn Button (390 MHz Billion Code)
Press and release the 0
4
buttons until the
#
button on the
# OF
PRESSES
® ) 1
® ) 2
® ) 3
4
button.
Press and release the Learn button on the
5
garage door opener. The Learn LED will
light.
Within 30 seconds...
Enter your 4-digit PIN, then
6
press and release the
ENTER button until the
garage door opener lights
flash or two clicks are
heard.
To test, enter your PIN,
7
then press the ENTER
button. The garage door
opener will activate.
To program the Keyless Entry to more than one garage door opener,
repeat the programming steps using a new PIN for each additional
garage door opener.
3