Cleaning And Storage - Chef's Choice 720 Manual De Instrucciones

CORD SAFETY
A short power supply cord is provided with this appliance to reduce the risk of the
cord becoming entangled, or tripping over it resulting in an injury. While EdgeCraft
does not recommend it, extension cords are available and may be used if care is
exercised in their use. If an extension cord is used, it must have an integral ground wire,
a three prong plug and the marked electrical rating of the extension cord should be at
least 10 amperes. The longer cord should be arranged so that it will not hang over the
counter top or tabletop where it can be pulled on by children or pets or tripped over.

CLEANING AND STORAGE

Note: Before cleaning or removing any part of the grinder for maintenance, always
turn the unit "off" and unplug the cord from the outlet.
Never immerse the motor housing in water or other liquid.
Cleaning: Grinder parts can be removed and disassembled from the motor housing for
thorough cleaning as described in previous sections (page 5). Wash in warm soapy
water with a soft cloth or sponge. Careful! The cutting blade has very sharp edges and
the holes in the grinding plate also have sharp edges. Keep hands clear!
After cleaning, sparingly coat the grinding plate, cutting blade, auger and locking ring
with vegetable oil.
Never use steel wool or scouring powder on any parts.
Do Not wash any of the detachable parts of the grinder in a dishwasher.
The grinder's motor housing can be cleaned by wiping with a soft, moist cloth.
SERVICE
This appliance is for household use only. No user-serviceable parts are inside.
Refer servicing to qualified personnel.
In the event service is needed, return your waffle maker to EdgeCraft Corporation,
where the cost of repair or electrical or mechanical adjustment can be estimated before the
repair is undertaken. If failure occurs within the warranty period there may be no charge.
Please include your return address and a brief description of the problem or damage
to the waffle maker on a separate sheet inside the box.
The Legacy Companies
149 Cleveland Drive, Paris, KY 40361 U.S.A.
Consumer Support 1-800-342-3255
Engineered in the U.S.A.
chefschoice.com
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the
product. Chef'sChoice®, EdgeCraft®, and the overall design of this product are registered trademarks of the
EdgeCraft Corporation.
Conforms to UL Std. 1083
Printed in China.
© 2020 The Legacy Companies
B20 E/F/S G720200
English — 8