Power Button - Renogy PHOENIX 120W Manual De Instrucciones

When the AC charger is connected with devices, the LED indicators will light up to
show remaining power of the charger.
( : LED is on ;
●
○
Battery Status Indicator
●●●●●●●●
●●●●●●●○
●●●●●●○○
●●●●●○○○
●●●●○○○○
●●●○○○○○
●●○○○○○○
●○○○○○○○
●○○○○○○○
(2Hz blinking frequency)
Low USB Output: when the power of the USB output is too low, the output will
automatically stop working.
Low Battery: the last blue LED indicator flashes.
Protection: when an abnormal connection is detected, all of the LED indicators
will flash and the portable charger will cut off all connections. To restart the AC
charger, recharge it or press the Power Button.
When the AC output is off, press and hold the Power Button for 3 seconds to turn
on the AC output. Press the button again to check the current battery level.
When the connected device is fully charged, the AC output will automatically shut
off. Turn it on again before charging another device.
If the AC output malfunctions, press the Power Button for 3 seconds to turn on
the AC output again.
: LED is off )

POWER BUTTON

Battery Level
100% - 87%
86% - 75%
74% - 62%
61% - 50%
49% - 37%
36% - 25%
24% - 12%
11% - 1%
0%
- 4 -