Urmet Yokis THERMARP Guía Rápida De Instalación página 15

6. Use buttons
and move on to the next parameter. In order: seconds / minutes / hour / year / month / day.
7. Once all parameters have been set, hold button
clock synchronisation menu.
PREREQUISITES
The THERMARP thermostat can be used to control a boiler or a 230V solenoid valve
directly via its internal relay or via the relay of a wireless receiver: MTR2000ERP(X) or
MTR2000MRP(X).
Wires with cross-section area of 0.5 mm
wires with cross section area smaller than 0.5 mm
In the case of a wireless receiver, before pairing the thermostat and the wireless receiver,
the MTR2000ERP(X) or MTR2000MRP(X) receiver must be wired and powered.
DS1054-055A
and to increase and decrease the values. Press button
Direct wiring
C
NO
max 5A 250 V~
NC
NA
or larger must comply with IEC 60332-1-2;
2
2
P15
pressed for 3 seconds to exit the
C
must comply with IEC 60332-2-2.
to confirm